|
|
TM 10-3930-660-24-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 10. Transmission Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. Check for foaming oil.
Add oil as necessary (WP 0011
5.
Loss of Power - Continued.
a. Check oil for low
transmission oil.
b. Check for water in
Find and repair leak. Drain and
transmission oil.
fill system (WP 0118 00).
c. Check for high
If too high, drain transmission
transmission oil level.
oil to proper level (WP 0118 00).
d. Check for proper
If incorrect, replace with proper
oil (WP 0118 00).
transmission oil. Check
oil specifications.
1. Check for drive line failure.
Repair or replace transmission
6.
No Power Transmitted in Any Range.
drive shaft or propeller shafts as
necessary (WP 0119 00 or WP
2. Check for range selector
Replace control valve linkage as
valve not positioned
necessary (WP 0122 00).
properly.
3. Check for low transmission
Add oil to transmission as
oil level.
necessary (WP 0011 00).
Refer to Step 7, Low Main
4. Check for low main pressure.
Pressure, in this table.
1. Check for low transmission
Add oil to transmission as
7.
Low Main Pressure.
oil level.
necessary (WP 0011 00).
2. Check for leaks in hydraulic
Check vehicle to locate
system.
hydraulic oil leaks. Replace or
repair hoses and lines as
necessary (WP 0195 00).
Check for manual selector
Adjust selector linkage as
8.
No Power Transmitted in One Range.
linkage out of adjustment.
necessary (WP 0114 00).
1. Check for low transmission
Fill transmission to proper oil
9.
Slow Clutch Engagement.
oil level.
level (WP 0011 00).
Refer to Step 5, Loss of Power,
2. Check for foaming
transmission oil.
in this table.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |