TRANSMISSION ASSEMBLY MAINTENANCE

TM 10-3930-660-24-1

TRANSMISSION ASSEMBLY MAINTENANCE

0118 00

THIS WORK PACKAGE COVERS

Servicing by Draining and Filling Transmission with Oil, Testing of Transmission Hydraulics

INITIAL SETUP

References

Tools and Special Tools

WP 0008 00

Tool kit, general mechanic's (Item 39, WP 0324 00)

Shop equipment, common no. 1 (Item 20, WP 0324

Equipment Condition

Simplified Test Equipment for Internal Combustion

Vehicle parked on level ground (TM 10-3930-660-

Engines - Reprogrammable (STE/ICE-R) Item

10)

Transmission cover removed (WP 0150 00)

Materials/Parts

Oil, lubricating (Item 33, WP 0323 00)

Gasket (4)

SERVICE BY DRAINING AND FILLING TRANSMIS-

SION WITH OIL

NOTE

Start and run engine until transmission tempera-

ture is between 160 and 190F (71-88C). Stop

engine.

Remove drain plug (1) from bottom of transmission

(2) and allow transmission oil to drain into container.

Remove strainer (3) and gasket (4) from transmission

(2). Discard gasket.

NOTE

Transmission contains approximately 5 gal. (19

L) of oil when filled.

Allow transmission oil to drain from transmission (2)

completely. Install drain plug (1).

409-4032