CARRIAGE TILT CYLINDER REPAIR -832450633

TM 10-3930-660-24-2

CARRIAGE TILT CYLINDER REPAIR

0307 00

THIS WORK PACKAGE COVERS

Disassembly, Cleaning, Inspection, Assembly

INITIAL SETUP

Tools and Special Tools

Materials/Parts - Continued

Back-up ring (13)

Tool kit, general mechanic's (Item 39, WP 0324 00)

Container

Shop equipment, automotive maintenance (Item 21,

O-ring (5 and 11)

Spanner wrench, frame tilt cylinder (Item 29, WP

Seal (7 and 14)

References

Materials/Parts

WP 0316 00

Cleaning compound, solvent (Item 10, WP 0323

TM 10-3930-660-10

Oil, lubricating (Item 33, WP 0323 00)

Rag, wiping (Item 40, WP 0323 00)

Equipment Condition

Sealant, Loctite (Item 48, WP 0323 00)

Carriage tilt cylinder removed (WP 0184 00)

DISASSEMBLY

WARNING

Hydraulic oil, under pressure, can remain within cylinder after disconnecting hydraulic hoses. To avoid

severe personal injury, slowly loosen counterbalance valve and allow pressure to escape before removing

cylinder entirely.

CAUTION

Do not scratch or damage the wear surface of rod, piston or gland. Follow this precaution to prevent failure

of cylinder.

NOTE

Use a vise with soft jaws to secure cylinder in a horizontal position for disassembly.

Relieve pressure in cylinder by slowly loosening counterbalance valve. Drain residual oil through valve hole

into a container.