 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TRANSMISSION DISCONNECT MASTER CYLINDER ASSEMBLY REPLACEMENT - CONTINUED
0117 00
INSTALLATION - CONTINUED
6.
Install clevis pin (5) and new cotter pin (4) to secure clevis (6) to pedal arm (7).
7.
Rotate pushrod (13) and/or clevis (6) in or out as
required until clevis pin (5) fits freely through holes
on clevis (6) and pedal arm (7).
8.
Secure clevis pin (5) to clevis (6) and pedal arm (7)
with new cotter pin (4).
9.
Tighten jamnuts (12 and 14).
10.
With pedal (7) and pedal (15) in full up position, check
15
for a 0.06 in. (1.52 mm) gap between head of cap-
screw (16) and pedal arm (15), adjust if necessary.
17
11.
If necessary, loosen nut (17) and turn capscrew (16)
until proper gap is achieved. Tighten nut (17) after
7
making adjustment.
5
16
4
6
12
13
14
409-464
END OF WORK PACKAGE
0117 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals