 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
WATER INLET MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Installation, Inspection
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Tool kit, general mechanic's (Item 39, WP 0324 00)
Vehicle parked on level ground (TM 10-3930-660-
10)
Materials/Parts
Engine off and cool (TM 10-3930-660-10)
Clamp (2)
Coolant drained from engine (WP 0053 00)
Seal (6)
REMOVAL
1.
To remove lower radiator hose (1), loosen two clamps
3
(2) at lower radiator hose (1). Discard clamps.
2.
Remove lower radiator hose (1) from radiator (3) and
4
5
water inlet (4).
3.
Remove water inlet (4).
2
4.
Remove three bolts (5), water inlet (4) and seal (6)
from engine. Discard seal.
5.
If necessary, remove two plugs (7).
6
409-251
7
1
INSTALLATION
NOTE
Clean hose fittings on engine and radiator. Scrape all rubber residue from hose fittings to avoid coolant loss.
1.
If removed, install two plugs (7).
2.
Install water inlet (4).
3.
Position new seal (6) and water inlet (4) on engine.
4.
Secure water inlet (4) with three bolts (5).
5.
Install lower radiator hose (1).
6.
Slide ends of lower radiator hose (1) on water inlet (4) and radiator (3).
7.
Secure lower radiator hose (1) with two new clamps (2).
8.
Fill coolant system with coolant (WP 0053 00).
END OF WORK PACKAGE
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals