RADIATOR MAINTENANCE

TM 10-3930-660-24-1

RADIATOR MAINTENANCE

0053 00

THIS WORK PACKAGE COVERS

Service, Removal, Installation, Pressure Testing Cooling System

INITIAL SETUP

References

Tools and Special Tools

WP 0145 00

Tool kit, general mechanic's (Item 39, WP 0324 00)

Shop equipment, common no. 1 (Item 20, WP 0324

Personnel Required

00)

Two

Materials/Parts

Equipment Condition

Antifreeze (Item 6, WP 0323 00)

Vehicle parked on level ground (TM 10-3930-660-

Sealant, Loctite (Item 44, WP 0323 00)

10)

Clamp (9, 21 and 22)

Engine off and cool (TM 10-3930-660-10)

Container, 10 gal.

Load backrest removed from storage position, if

stored (TM 10-3930-660-10)

Locknut (40 and 44)

Battery cables disconnected (WP 0107 00)

Lockwasher (13, 30, 33 and 36)

WARNING

DO NOT service cooling system unless engine has been allowed to cool down. This is a pressurized

cooling system and escaping steam or hot coolant will cause burns.

DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down. Loosen

cap to first stop and let any pressure out of cooling system, then remove cap. Failure to follow this

warning may cause burns.

Wear effective eye, glove, and skin protection when handling coolants. Failure to do so may cause

injury.