 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
RADIATOR HOSES MAINTENANCE - CONTINUED
0056 00
INSTALLATION
NOTE
Clean hose fittings on engine and radiator. Scrape all rubber residue from hose fittings to avoid coolant leaks.
1.
Slide one end of upper hose (1) on engine water outlet.
1
2.
Open two new clamps (2) and slide them on hose (1).
3.
Slide other end of hose (1) on upper radiator fitting.
4.
Position one new clamp (2) at each end of hose (1) and
tighten clamps (2).
2
5.
Slide one end of lower radiator hose (3) on lower radi-
ator fitting.
6.
Open two new clamps (4) and slide them on hose (3).
7.
Slide other end of hose (3) on engine water inlet.
8.
Position one new clamp (4) at each end of hose (3) and
4
tighten clamps.
3
409-241
9.
Fill engine with coolant (WP 0053 00).
INSPECTION
1.
Inspect upper (1) and lower (3) radiator hoses for cracks and cuts. Use mirror and flashlight to see backside of hoses.
2.
Squeeze hoses (1 and 3) to check for soft spots.
If necessary, replace hoses (1 and 3). See Removal and Installation.
3.
END OF WORK PACKAGE
0056 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals