Figure 4-32. Overhead guard, removal and installation

TM 10-3930-631-12

1. Screw

2. Lock washer

3. Nut

4. Plastic plug

5. Overhead guard

Figure 4-32. Overhead guard, removal and installation

(3) Carefully lift overhead guard from truck,

4-46. Operator's Seat

using hoist.

(4) Check plastic plugs (4) and replace if

a. Removal. Inspect seat for tears, rips and

worn or damaged.

damage to cushions and frame. Replace if necessary.

b. Installation.

(1) Refer to paragraph 4-24 and disconnect

(1) Use a suitable hoist and lift overhead

and remove taillight from rear of seat.

guard (5, fig. 4-32) into position on truck frame.

(2) Remove lock nuts (1, fig. 4-33) and

(2) Secure overhead guard to frame with

washers (2) and remove seat assembly (12) from plate

screws (1), lock washers (2) and nuts (3).

(4).

4-39