Stoplight and Interlock Switches

TM 10-3930-631-12

NOTE. DISCONNECT BATTERY RECEPTACLE.

EMERGENCY STOP SWITCH

1. REMOVE SETSCREW AND REMOVE KNOB.

REMOVE LEVERS.

2. DISCONNECT WIRES.

3. REMOVE ROUND NUT AND REMOVE

SWITCH. BATTERY RECEPTACLE

1. LIFT

LEVER

AND

SEPARATE

2. REMOVE UPPER BOX AND UNSOLDER

CABLES.

3. REMOVE MOUNTING SCREWS AND

REMOVE LOWER RECEPTACLE.

CABLES

FROM

LOWER

RECEPTACLE.

Figure 4-4. Emergency stop switch and battery

receptacle, removal and installation.

4-23. Stoplight and Interlock Switches

Figure 4-5. Stoplight and interlock switches,

a. Inspection. Depress brake pedal and check

installed view.

stoplight. If stop light does not operate, replace switch.

4-24. Lights

b. Removal. Refer to figure 4-5 and remove the

a. Headlight.

stoplight and interlock switches.

(1) Lamp replacement. Remove two screws

c. Installation. Refer to figure 4-5 and install the

and separate guard and lens from body. Disconnect

stoplight and interlock switches.

wires from lamp (fig. 4-6), remove locking ring, and

remove lamp from headlight. Install lamp in reverse

order of removal.

4-10