Overhead Guard - TM-10-3930-631-120065

TM 10-3930-631-12

Figure 4-31.1. Drip pan, exploded view.

Figure 4-31. Floor and toe plates,

removal and installation.

(2) Remove drip pan (5).

b. Installation.

(2) Remove four screws and remove toe

(1) Install drip pan (5) with four screws (1),

plate (fig. 4-31) from truck.

eight washers (2), two lockwashers (3) and four nuts (4).

c. Installation.

4-45. Overhead Guard

(1) Install toe plate (fig. 4-31) in position on

a. Removal.

truck and secure with four screws.

(1) Attach a suitable hoist to overhead

(2) Install floor plate (fig. 4-31) on truck and

guard and lift guard enough to take strain from mounting

secure with two screws.

screws.

4-44.1

Drip pan

(2) Remove screws (1, fig. 4-32), lock

a. Removal.

washers (2) and nuts (3) from lower legs of overhead

(1) Refer to figure 4-31.1 and remove four

guard.

screws (1), eight washers (2), two lock washers (3) and

four nuts (4). (2) Remove drip pan (5).

Change 2 4-38