Parking Brake - TM-10-3930-630-120114

TM 10-3930-630-12

4-92. Parking Brake

(2) Disconnect brake cable from parking brake

a. General. The parking brake is on the drive shaft

(3) Remove screws (1, Fig. 4-78) and

to the rear of the drive axle.

lockwashers (2) and remove brake drum (3) from pinion

b. Removal

flange (13).

(1) Disconnect drive shaft (para 4-94) from

parking brake.

1 Screw

8 Backing plate

2 Lockwasher

9 Screw

3 Brake drum

10 Lockwasher

4 Spring

11 Cotter pin

5 Brake shoe

12 Nut

8 Brake lever

13 Flange

7 Roller

Figure 4-78. Parking brake, exploded view.

(4) Remove cotter pin (11) and nut (12) from

and remove backing plate from differential carrier.

c. Inspection.

pinion shaft and remove flange (13).

(5) Remove brake lever (6) and rollers (7) from

(1) Check backing plate for distortion, loose or

backing plate (8).

sheared rivets and worn pawls.

(6) Remove return springs (4) and remove

(2) Inspect brake lining for wear or grease

brake shoes (5).

saturation.

(7) Remove screws (9) and lockwashers (10)

4-86