Carburetor - TM-10-3930-630-120083

TM 10-3930-630-12

1 Clamp

10 Wire nut

2 Hoe

11 Lockwasher

3 Tywrap

12 Rubber washer

4 Clamp

13 Cover and base

5 Hose

14 Element

6 Indicator

15 Screw

7Tube

16 Lockwasher

8 Hose

17 Nut

9 Clamp

18 Bracket

Figure 4-46. Air cleaner, exploded view

element (14) from truck.

of air cleaner. Do not fully tighten clamp.

d. Inspection and Repair.

(3) Connect clamps (4), tube (7) and hose (5)

to air cleaner hose and carburetor. Aline hoses and

(1) Inspect

hoses

for

damage

and

tube and tighten clamps

deterioration.

(4) Connect hose (2) to air cleaner and engine

(2) Inspect tube and indicator for dents and

with clamps (1). Install tywrap (3).

damage. Check for restrictions in tube.

Remove

(5) Close side panel and lower seat.

restriction if present.

(3) Check clamps for damaged threads and

4-58. Carburetor

cracks.

(4) Check air cleaner cover for dents and

a. General. The carburetor is mounted below the

damage

(5) Replace unserviceable parts.

intake manifold on the left side of the engine. Cables

e. Installation

connect the accelerator pedal and choke control knob to

(1) Install assembled air cleaner cover and

the carburetor.

b. Adjustments. Open left side panel to gain

base (13, fig. 4-46) with element on bracket and secure

with wing nut (10) and lockwasher (11).

access to the carburetor (fig. 4-47).

(2) Connect hose (8) and clamp (9) to bottom

4-55