Click here to make tpub.com your Home Page

Page Title: Table 3-1. Preventive Maintenance Checks and Services
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 10-3930-627-12
Table 3-1. Preventive Maintenance Checks and Services
Operator Maintenance Category
Daily
Interval and
Item to be
Paragraph
sequence No.
inspected
Procedure
reference
Before
During
After
operation  Operation
operation
1
Drive belt tension and
Check for 1/2 inch deflection at firm
condition.
thumb pressure midway between
alternator and fan pulleys. Check for
damage or aging.
2
Tires inflation and
Check for 100 psi inflation and wear,
condition.
cuts, or imbedded objects.
3
Oil tank level
Check and maintain level. Refer to L.O.
4
Transmission oil
Check and maintain level.
5
Fire extinguisher
Check charge and for broken seal.
6
Instruments
Note readings. Report abnormal
indications promptly.
7
7
Brakes
Check operation, and pedal for 3/8 inch
to 5/8 inch free travel.
8
Fuel tank
Add fuel as needed.
9
Battery
Check and maintain electrolyte 3/8 inch
above plates.
10
Radiator
Check and maintain coolant level.
11
Horn
Check for operation.
12
Hand brake
13
Engine
Check oil level, fill as required by LO.
14
Lights
Check for operation.
SECTION IV. TROUBLESHOOTING
operation immediately and as accurately as possible.
3-6. Operator Responsibilities
The operator is authorized to perform the jobs listed in
The operator will report to the proper authority any
section V following.
deficiencies noted before, during, or after operation.
Report any strange noises or subnormal
SECTION V. MAINTENANCE OF COMPONENTS
d. Radiator. Check and maintain coolant level.
3-7. Operator's Maintenance
e. Battery. Check electrolyte level. Add distilled
a. Engine. Check oil level by dipstick. Add oil
water as needed to cover plates 3/8 inch.
as needed.
Use only oil specified in the current
f. Transmission. Check level with engine warm
lubrication order.
and idling. Add oil specified for local temperatures as
b. Engine Air Cleaner. Remove filter element,
needed to bring level to mark on dipstick.
clean surface with gentle compressed air blast and soft
brush. Replace when necessary.
c.  Fuel Tank.  Fill as needed with specified
gasoline.
3-2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business