|
|
TM10-3930-242-12
Figure 4-38. Brake accumulator.
Section XV. MAINTENANCE OF WHEELS
b. Cleaning and Inspection.
WARNING
(1) Clean the wheels and flanges with
Drycleaning solvent, P-D-680, used to
drycleaning solvent (item 1, App F) and dry
clean parts is potentially dangerous to
thoroughly.
personnel and property. Do not use near
(2) Inspect the tires for cuts and deterioration.
open flame or excessive heat. Flash point
Check lockring, rim, wheel flanges, wheel, and nuts
of solvent is 138F.
for cracks, breaks, and dents. Replace all defective
parts.
WARNING
WARNING
Insure lockring is properly seated before
Do not remove more than one tire at a
inflating tire. Serious injury to personnel
time, Serious injury to personnel may
may result should lockring snap out of
result if vehicle falls.
seat.
c. Installation. Refer to figure 4-39 and install
wheel flanges, wheels, and tires.
the wheel flanges, wheels and tires.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |