 |
|||
|
|
|||
|
Page Title:
Steering Wheel Removal (MHE-191). |
|
||
| ||||||||||
|
|
 b. Drive Wheel Removal (MHE-190).
(2) Remove capscrews, lockwashers, and
hubcap.
(1) Block up front end of truck to clear
wheels of floor.
(3) Bend ears of lock plate away from nut,
then remove nut, lock plate, key wash-
(2) Remove wheel mounting nuts then re-
ers, and outer bearing cone.
move outer and inner wheels with
(4) Remove wheel from steering knuckle.
tires assembled.
(5) Remove grease shield and inner bear-
(3) Remove adapter mounting nuts, then
remove outer wheel adapter from hub.
ing cone.
(4) Bend ears of lock plate away from nut,
(6) Tap out bearing cups from wheel hub
then remove nut, lock plate, bearing
using a brass drift positioned in hub
slots.
washer, and outer bearing cone.
(7) R e p e a t above procedures for the
(5) Remove hub from spindle.
other wheel.
(6) Remove grease shield and inner bear-
ing cone from drive gear side of the
e. Steering Wheel Removal (MHE-190).
hub.
(1) Block up rear end of truck to clear
(7) Tap out bearing cups from hub using
wheels of floor.
a brass drift positioned in hub slots.
(2) Remove wheel mounting nuts, then re-
c. Drive Wheel Installation. Reverse proced-
move wheel with tire assembled.
ures in a or b above. Install and adjust wheel
(3) Remove capscrews, lockwashers, and
bearings as instructed in h below.
hubcap.
d. Steering Wheel Removal (MHE-191).
(4) Bend ears of lock plate away from nut,
(1) Block up real end of truck to clear
then remove nut, lock plate, key
wheels of floor.
washer, and outer bearing cone.
AGO 6217A
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals