Figure 14. Engine removed from truck, rear view.

TM 10-3930-222-20

Figure 14. Engine removed from truck, rear view.

22. Manifolds

(4) Separate the intake and exhaust

manifolds.

(5) Remove the heat control (par. 34).

a. Removal.

b. Installation.

(1) Remove the carburetor (par. 26).

(1) Reverse procedures in a above, using

(2) Remove the muffler and exhaust elbow

new gaskets.

(2) Be sure the intake and exhaust manifolds

(3) Unscrew the nuts and washers that secure

are securely attached to engine before

the manifolds to the engine and remove

tightening exhaust elbow to manifold.

the manifolds and gasket.