Figure 29. Exhaust elbow installed on truck.

TM 10-3930-222-20

(3) Remove the nuts and lockwashers that secure

(2) Remove the key (1) and slide counterweight (3)

exhaust elbow to the exhaust manifold.

from the shaft (10).

Remove the exhaust elbow and gasket.

(3) Remove the capscrew (4) and lockwasher (5)

c. Installation. Reverse procedures in b above,

from the manifold.

using new gaskets.

(4) Remove the cover (6) and spacer (7) from the

manifold.

34. Heat Control

(5) Remove the thermostat (8) and washer (9) from

the shaft.

a. Removal.

b. Installation. Reverse procedures in a above.

(1) Remove the nut (11, fig. 31) from the screw (2).

Figure 29. Exhaust elbow installed on truck.