Table I. Maintenance Indicator Checklist

TM 10-3930-222-20

S-Every 6 months or 500 operating hours,

d. Wherever

possible,

these

preventive

whichever occurs first.

maintenance services have been fully described in the

c. The deficiencies or shortcomings noted and the

checklist. For detailed test or adjustment procedures,

and for repair or replacement procedures, refer to the

corrective action taken will be reported on the

paragraph listed in the reference column of the

appropriate forms prescribed and explained in TM

checklist.

3K750.

Table I. Maintenance Indicator Checklist

KEY:

M-Every 2 months or 100 operating hours, whichever occurs first.

S-Every 6 months or 500 operating hours, whichever occurs first.

Item

Interval

Par.

No.

Procedure

ref.

PRELIMINARY SERVICES

Fuel, Oil, and Coolant.

a. Fill fuel tank to proper level.

b. Verify coolant level in radiator. Add coolant as necessary.

c. Lubricate truck in accordance with LO 10-3930-222-20 and

paragraph 11.

Modifications and Publications.

a. Be sure the logbook and other necessary publications are either

on or near the truck.

b. Check to be sure all required modifications have been accom-

plished and that they have been recorded in the logbook as required

by TM 38-750.

Body.

a. Inspect the truck body for broken or missing components and

for dents or other damages. Be certain counter weight is mounted

securely.

b. Inspect the paint, markings, and identification plates for visible

defects.

Fork Carriage.

a. Inspect fork carriage for damage and secure mounting.

b. See that the forks are not bent.

c. Inspect rollers for binding, wear, cracks, and breaks.

d. Turn crank assembly and check fork adjusting mechanism for

proper operation.

Lift Chains.

a. Inspect lift chains for wear and for clogged, broken, or pitted

rollers.

b. Be sure forks are parallel to driving surface.

Mast Assembly.

Inspect mast assembly for correct alinement, secure mounting,

and visible defects.

Hydraulic Cylinders

Inspect lift and tilt cylinders for correct alinement, secure mount-

ing, scored or dirty piston rods, and oil leaks.

Wheels and Tires.

69, 70

a. Inspect wheels for secure and proper mounting, proper seating

of lock-rings, and distortion.'

69, 70

b. Inspect tires for excessive wear, cuts, breaks, abrasions, blisters,

and penetration of foreign objects. Check tires for proper inflation

of 100 psi.