Figure 84. Hood support brackets.

TM 10-3930-222-20

Figure 84. Hood support brackets.

Section XIV. HYDRAULIC LIFT SYSTEM (GROUP 24)

a. Removal.

80. General

(1) Tilt mast forward as far as it will go.

This section contains instructions for maintenance

(2) Remove capscrew and lockwasher that secure

operations

which

second-echelon

maintenance

keeper to truck and remove keeper from

personnel are authorized to perform on the hydraulic

truck.

tank strainer, the tilt cylinder, the lift chains, and the

(3) Loosen the setscrew (14, fig. 86) and jamnut

hydraulic tank.

(13) that lock the rod end (11) to the rod (10).

(4) Unscrew rod (10) from the rod end.

81. Tilt Cylinder

(5) Remove rod end from mast stud.

Refer to figures 85 and 86 and remove the tilt cylinder

(6) Disconnect and cap hydraulic lines.

assembly as follows:

130