INNER BOOM REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

16-12. INNER BOOM REPLACEMENT/REPAIR (CONT)

NOTE

Ropes will be used to pull extend chain, electrical cable, and three hydraulic hoses

through boom when inner boom is installed.

(1)

Place two ropes inside length of intermediate boom.

(2)

At front of intermediate boom, attach one rope to extend chain and other rope to

electrical cable and three hydraulic hoses.

(3)

Using another forklift, move inner boom to position in front of and in alignment with

intermediate boom of vehicle. Place on jackstands or suitable supports.

f. Installation.

NOTE

Ropes will be used to pull extend chain, electrical cable, and three hydraulic hoses

through boom when inner boom is installed.

(1)

Place two ropes inside length of intermediate boom.

(2)

At front of intermediate boom, attach one rope to extend chain and other rope to

electrical cable and three hydraulic hoses.

(3)

Using another forklift, move inner boom to position in front of and in alignment with

intermediate boom of vehicle. Place on jackstands or suitable supports.

(4)

Using overhead lifting device, other forklift and lifting straps or chains, carefully raise

inner boom and push inner boom inside intermediate boom approximately 2 ft (610

mm).

NOTE

Overhead crane can remain in position for safety.

16-68.2

Change 1