INNER BOOM REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

e. Assembly.

WARNING

Use care when installing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(1)

Install clevis (97) to extend chain (85) with pin (99) and two new retaining rings (98).

(2)

Install clevis (97) and extend chain (85) to rear of inner boom (9) with washer (96) and

two nuts (95).

NOTE

Use care when removing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(3)

Install clevis (92) to end of retract chain (89) with pin (94) and two new retaining rings

(93).

(4)

Install retract chain (89) and clevis (92) to bottom-rear of inner boom (9) with pin (91)

and new cotter pin (90).

(5)

Install boom electrical junction box assembly to inner boom (TM 10-39030-673-20).

(6)

Install boom electrical cable to inner boom (TM 10-39030-673-20).

(7)

Install attachment control valve to inner boom (TM 10-3930-673-20).

(8)

Install boom hydraulic hoses to inner boom (TM 10-3930-673-20).

(9)

Install boom extend cylinder to inner boom (TM 10-3930-673-20).

(10) Install wear pads and mounting hardware to inner boom as marked (para 16-16).

(11) Install attachment cylinder to front of inner boom (TM 10-3930-673-20).

Change 1

16-68.1