FRAME ASSEMBLY REPAIR

TM 10-3930-673-34

b. Cleaning. See Cleaning Instructions (Para 2-12).

c. Inspection. See Inspection Instructions (Para 2-14).

d. Assembly.

(1)

Install bushing (6) in frame (2).

(2)

Install two hinges (5) on frame (2).

(a)

Position new hinge (5) on frame, using measurements taken at disassembly.

(b)

Hold hinge (5) in position, using a suitable clamp.

CAUTION

Do not weld door side of hinge to frame. Welding incorrect half of hinge to frame will

result in damage to frame and hinge.

(c)

Weld hinge (5) to frame (2) at several points along pin side (refer to TM 9-237).

(3)

Install conduit (4) in frame (2).

(4)

Install conduit (3) in frame (2).

(5)

Install two conduits (1) in frame (2).

NOTE

Follow-on Maintenance:

Install rear axle (Para 9-3).

Install front axle (Para 8-3).

Install boom assembly (Para 16-11).

Install cab assembly with ROPS/FOPS (Para 14-3).

Install transmission (Para 7-4).

Install engine (Para 3-3).

Install engine door panels (TM 10-3930-673-20).

END OF TASK

13-3/(13-4 blank)