 |
|||
|
|
|||
|
Page Title:
FRONT AXLE ASSEMBLY REPLACEMENT/REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
8-3. FRONT AXLE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(h)
Install oil filler plug (16) on front
axle assembly (8).
(i)
Install oil drain plug (15) on front
axle assembly (8).
(j)
Install elbow (14), hose (6), and
breather (13) on front axle
assembly (8).
(2)
Install front drive wheel spindle
(3)
Install front differential carrier
assembly and front universal
(cardan) steering joints (Para 8-5).
(4)
Install front planetary wheel ends
TR00252
(5)
Install parking brake assembly (TM
10-3930-673-20).
(6)
Install tie rods (Para 12-6).
(7)
Install steering cylinders (TM 10-3930-673-20).
f. Installation.
B
12
(1)
Place a steel bar (1 in. [25.4 mm]
minimum diameter and 6 ft [1.83 m]
8
long) in the tilt cylinder rod pivot
11
10
pin mounting hole (A). The bar will
prevent front axle assembly (8) from
rotating when installed.
A
(2)
Use a floor jack to raise front axle
12
assembly (8).
9
TR00252
(3)
Remove stands.
(4)
Lower front axle assembly (8) until it is supported by tires.
(5)
Roll front axle assembly (8) under vehicle, using 6 ft (1.83 m) bar and floor jack to
prevent the axle assembly from rotating.
(6)
Align axle pivot pin hole (B) with frame pivot pin holes.
(7)
Ensure washer spacers (12) are in place on frame pivot pin hole; use floor jack to
carefully raise axle assembly while assistant holds assembly steady using 6 ft [1.83 m]
bar in axle tilt cylinder mounting hole (A).
8-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals