 |
|||
|
|
|||
|
Page Title:
FRONT PLANETARY WHEEL ENDS REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
8
This Task Covers:
a. Removal
c. Inspection
b. Cleaning
d. Installation
INITIAL SETUP
Equipment Condition (Cont)
Tools and Special Tools
Planetary wheel ends drained
Tool Kit, General Mechanic's: Automotive
(TM 10-3920-673-20)
(Item 23, Appendix D)
Wheel assemblies removed
Shop Equipment, Automotive Maintenance,
(TM 10-3920-673-20)
Common No. 2 Less Power
Front disc brake assemblies removed
(Item 17, Appendix D)
Shop Equipment, Automotive Maintenance and
Repair; Field Maintenance, Basic, Less Power
Materials/Parts
(Item 18, Appendix D)
Compound, Sealing (Item 13, Appendix B)
Hub Drag Tool - Fabricated Tool
Oil, Lubricating, Gear (Item 29, Appendix B)
Rags, Lint-free (Item 34, Appendix B)
Lifting Device, 2,000 lb (907.18 kg) capacity
Ring, Snap (3)
Puller Kit (Item 15, Appendix D)
Ring, Snap
Container, 1 gal (3.79 l) capacity
Equipment Condition
Front of vehicle raised 8 in. (203.2 mm) and
supported under front axle
(TM 10-3930-673-20)
a. Removal.
(1)
Remove planetary gear assembly.
(a)
Mark planetary spider (1) and wheel
hub (2) for correct alignment during
installation.
TR00004
(b)
Place a suitable container under
planetary wheel end assembly.
(c)
Remove 16 screws (3) and
washers (4) from planetary
spider (1) and wheel hub (2).
(d)
Use three screws (3) in jack screw
holes (A) and tighten to remove
planetary spider (1) from wheel
hub (2).
TR00278
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals