TRANSMISSION OUTPUT SHAFT REPLACEMENT/REPAIR/ADJUSTMENT - continued

TM 10-3930-673-34

TR00238

(6)

Remove output cap (8) from transmission (7) and remove spur gear (12) and bearing cone (13) from oil

baffle pan (14).

(7)

Remove two screws (15) and oil baffle pan (14) from output cap (8).

(8)

Remove plug (16) and plug (17) from output cap (8).

(9)

Using puller, remove bearing cup (18) and seal (19) from output cap (8). Discard seal.

(10) Remove shims (20) and large preformed packing (21) from top surface of transmission (7).

WARNING

Use care when removing snap and retaining rings. Snap and retaining rings are under spring tension

and can act as projectiles when released causing severe eye injury.

Change 1

7-51