TRANSMISSION OUTPUT SHAFT REPLACEMENT/REPAIR/ADJUSTMENT - continued

TM 10-3930-673-34

7-6. TRANSMISSION OUTPUT SHAFT REPLACEMENT/REPAIR/ADJUSTMENT (CONT)

TR00238

(11) At inside of transmission (7), remove retaining ring (22), thrust washer (23), and bearing cone (24) from

output shaft (6). Discard retaining ring.

(12) Raise transmission (7) to vertical position and remove output shaft (6).

(13) Using puller, remove bearing cup (25) and seal (26) from transmission (7). Discard seal.

(14) Remove two studs (11) from transmission (7), if necessary.

b. Cleaning. See Cleaning Instructions (Para 2-12).

c. Inspection. See Inspection Instructions (Para 2-14).

d. Installation.

(1)

Install two studs (11) to transmission (7) if removed.

(2)

With transmission (7) in vertical position, press bearing cup (25) and new seal (26) into transmission.

7-52

Change 1