TORQUE CONVERTER REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

7-3. TORQUE CONVERTER REPLACEMENT/REPAIR (CONT)

TR00188

(4)

Install parts (10 through 13) in front housing (8).

(a)

Install lubrication fitting (13) on front housing (8).

WARNING

Use care when installing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(b)

Install oil seal (12), bearing (11), and snap ring (10) in front housing (8).

f. Installation.

(1)

Install torque converter (4) in transmission housing (9).

(2)

Install front housing (8), twelve screws (7), starwashers (6), and nuts (5) on transmission

housing (9).

(3)

Install yoke (3), washer (2), and nut (1) on torque converter (4). Tighten nut to 300 -

350 lb-ft (406.8 - 474.5 Nm).

NOTE

Follow-on Maintenance: Install transmission driveshaft shaft (Para 7-6).

END OF TASK

7-8