 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-34
WARNING
Use care when installing snap and retaining rings. Snap and retaining rings are under
spring tension and can act as projectiles when released and could cause severe eye
injury.
(4)
Install pinion stop (37) and retaining ring (38) on drive shaft (30). Retaining ring may
have to be forced over drive shaft using a block of wood.
(5)
Install plug (36) and washers (35, 34, and 33) on drive shaft (30).
(6)
Install lever (27), drive clutch assembly (32), shaft support (31), and drive shaft (30) as an
assembly in drive housing (22).
(7)
Install plug (29) in drive
22
housing (22).
29
(8)
Install bracket (12) and two bolts
with captive lockwashers and
washers (28) on drive housing (22).
12
28
TR01411
(9)
Install solenoid (3) on drive
26
housing (22).
24
3
25
(a)
Install solenoid (3) on drive
23
housing (22). Position solenoid so
that solenoid engages lever (27).
(b)
Install screw (26), lockwasher (25),
and nut (24) in drive housing (22)
and lever (27).
(c)
Install two screws with captive
lockwashers (23) in solenoid (3).
22
TR01412
6-17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals