|
|
TM 10-3930-673-34
6-4. STARTER REPAIR (CONT)
(10)
Install two coil brushes (15), ground
17
brushes (14), and four springs (21) on
brush holder (20).
16
(11)
Install two screws with captive
14
lockwashers (19) on ground
19
brushes (14), wire connectors, and
15
brush holder (20).
(12)
Install two screws with captive
lockwashers (18) and coil
18
brushers (15) wire connectors on
9
frame and field coil assembly (9).
13
21
(13)
If removed, install bearings (16 and
20
17) on armature (13).
14
15
19
(14)
Install armature (13) in frame and
18
field coil assembly (9). Ensure that
TR01413
two ground brushes (14) and coil
brushes (15) clear commutator bars.
(15)
Install pin (11), preformed
packing (10), frame, and field coil
assembly (9) on bracket (12).
(16)
Install preformed packing (8),
3
cover (5), two preformed
2
packings (7), and bolts (6) on frame
and field coil assembly (9).
22
(17)
Install two bolts (4) in cover (5).
(18)
Install wire (1) and nut with captive
12
washer (2) on solenoid (3).
1
10
NOTE
11
Follow-on Maintenance: Install
8
starter (TM 10-3930-673-20).
5
END OF TASK
9
4
7
6
6-18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |