ENGINE MOUNTS REPLACEMENT - TM-10-3930-673-340127

TM 10-3930-673-34

3-4. ENGINE MOUNTS REPLACEMENT

This Task Covers:

a. Removal

c. Inspection

b. Cleaning

d. Installation

INITIAL SETUP

Materials/Parts

Tools and Special Tools

Compound, Sealing (Item 42, Appendix B)

Tool Kit, General Mechanic's: Automotive

Tags (Item 55, Appendix B)

(Item 23, Appendix D)

Lockwashers (2)

Shop Equipment, Automotive Maintenance,

Lockwashers (3)

Common No. 2 Less Power

Lockwashers (4)

(Item 17, Appendix D)

Mounts, Rubber (3)

Wrench, Torque, 0 - 800 lb-ft (0 - 1085 Nm)

Washers, Rebound (2)

(Item 29, Appendix D)

Forklift Truck, 2,000 lb (907.18 kg) capacity

Lifting Chains, 2,000 lb (907.18 kg) capacity (2)

Equipment Condition

Radiator removed (TM 10-3930-673-20)

Muffler removed (TM 10-3930-673-20)

Engine covers and air cleaner removed

(TM 10-3930-673-20)

a. Removal.

WARNING

Engine assembly weighs 1,075 lb

(487.61 kg). Attach suitable lifting

device prior to removal to prevent

possible injury to personnel.

NOTE

"Front" and "rear" engine references

used in this paragraph are relative

to front and rear of vehicle. Fan side

of engine is designated rear of

engine, and flywheel end of engine

is identified as front of engine.

TR01771

(1)

Support engine with lifting chains

(2,000 lb [907.18 kg] capacity) and forklift truck (2,000 lb [907.18 kg] capacity).

(a)

Attach lifting chains to engine lifting brackets (1 and 2).

(b)

Attach lifting chains (2,000 lb [907.18 kg] capacity) to forklift forks and operate forklift just

enough to remove slack from lifting chains.

3-25