ENGINE ASSEMBLY REPLACEMENT - continued

TM 10-3930-673-34

3-3. ENGINE ASSEMBLY REPLACEMENT (CONT)

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin

or clothing, wash immediately with soap and water.

(b)

Apply sealing compound to threads of three screws (8).

(c)

Install coupling (9) on engine with three screws (8). Tighten screws to 25 lb-ft (33.90 Nm).

(9)

Install drive assembly (1) on transmission (2).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin

or clothing, wash immediately with soap and water.

(a)

Apply sealing compound to threads of four screws (3).

(b)

Install universal joint (5) of shaft assembly (1) on input yoke (6) of transmission (2) with four

lockwashers (4) and screws (3). Tighten screws to 41 lb-ft (55.59 Nm).

(10) Tie wrap hoses and electrical wires as noted during engine removal and as necessary to

prevent damage to hoses and wires.

NOTE

Follow-on Maintenance:

Install muffler (TM 10-3930-673-20).

Service air cleaner elements (TM 10-3930-673-20).

Install air cleaner (TM 10-3930-673-20).

Install radiator (TM 10-3930-673-20).

Service cooling system with coolant (TM 10-3930-673-20).

Service engine with engine oil (TM 10-3930-673-20).

Connect negative battery cable (TM 10-3930-673-20).

Adjust accelerator cable (TM 10-3930-673-20).

END OF TASK

3-24