 |
|||
|
|
|||
|
Page Title:
FRONT DIFFERENTIAL CARRIER ASSEMBLY MAINTENANCE |
|
||
| ||||||||||
|
|
 TM 10-3930-660-24-2
FRONT DIFFERENTIAL CARRIER ASSEMBLY MAINTENANCE
THIS WORK PACKAGE COVERS
Disassembly, Cleaning, Inspection, Assembly, Adjustment
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Differential washer, 1-3/4 O.D. (Two)
Tool kit, general mechanic's (Item 39, WP 0324 00)
Differential wingnut, 1/4-20
Shop equipment, automotive maintenance (Item 21,
Gasket (25)
Retaining hardware, no spin
Differential resistance tool (Item 7, WP 0324 00)
Rivet (18)
Yoke nut tool (Item 47, WP 0324 00)
Wood block
Lifting device, 4,000 lb capacity
References
Materials/Parts
Compound, marking (Item 13, WP 0323 00)
TM 10-3930-660-10
Compound, sealing (Item 14, WP 0323 00)
Personnel Required
Sealant, Loctite (Item 43, WP 0323 00)
Two
Oil, lubricating (Item 32, WP 0323 00)
Equipment Condition
Cotter pin (3)
Front differential carrier assembly removed (WP
Differential bolt, 1/4-20 X 7 in.
DISASSEMBLY
1.
Use a center punch and hammer to mark one carrier
5
leg (1) and bearing cap (2) to enable correct matching
4
at reassembly.
4
2.
Remove cotter pins (3) holding two bearing adjusting
rings (4) in position, main differential and ring gear
8
assembly (5). Discard cotter pins.
3.
Remove two capscrews (6) and two flatwashers (7)
from each of two bearing caps (2).
1
2
4.
Remove two bearing caps (2) from carrier (8).
3
5.
Remove two bearing adjusting rings (4) from ring gear
assembly (5).
6
7
409-1237
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals