 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TRANSMISSION FRONT COVER ASSEMBLY MAINTENANCE - CONTINUED
0290 00
ASSEMBLY - CONTINUED
19.
Apply loctite 242 to converter pressure relief valve
11
(15) and drive into bore until valve seat shoulders
12
6
against bottom of bore.
13
20.
Apply loctite 59241 and install allen head pipe plug
(14) to back side of front cover (6).
7
21.
Install stator support tube (13), cover plate (12) and
8
six capscrews (11).
15
22.
Install transmission input shaft (10), as an assembly,
through back of front cover (6). Ensure that flat side
bearing retainer (40) is against front cover (6).
14
23.
Apply loctite 242 on threads of three capscrews (9)
40
and install.
10
9
24.
Install thrust washer (8) against cover plate (12).
409-1213
25.
Install impeller gear (7) against thrust washer (8).
26.
Install bearing (5) with retaining ring (4) on bearing
retainer (2).
3
6
27.
Install new oil seal (3) in bearing retainer (2).
4
5
28.
Apply permatex gasket material to bearing retainer
1
(2). Ensure that new oil seal (3) is on the outside
before installation bearing retainer (2). Install bearing
2
retainer (2) and seven capscrews (1).
409-1207
29.
Install transmission oil pump (WP 0240 00).
30.
Install torque converter (WP 0236 00).
31.
Install transmission control valve (WP 0239 00).
32.
Install transmission assembly (WP 0237 00).
33.
Operate transmission, check for proper operation and leaks (TM 10-3930-660-10).
END OF WORK PACKAGE
0290 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals