 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TRANSMISSION FRONT COVER ASSEMBLY MAINTENANCE - CONTINUED
0290 00
ASSEMBLY - CONTINUED
9.
Install shaft (27) with bearing (30) in front cover (6).
37
38
10.
Use a suitable puller to pull shaft (27) through front
39
25 26
side of front door (6) and through auxiliary pump gear
(26) until snap ring groove is seen.
6
31
33
32
11.
Install snap ring (25).
12.
Apply loctite 242 to cover (28) and press onto front
cover (6).
29
30
27
35
34
36
28
409-1210
13.
Install hydraulic piston pump drive adapter (18).
14.
Install bearing roller (23) and bearing (22) on shaft of
auxiliary pump gear (24).
15.
Install snap ring (21).
16.
Slide parts (21 thru 24) as an assembly into hydraulic
19
piston pump drive adapter (18).
24
17.
Install new O-rings (19 and 20) on hydraulic piston
23
pump drive adapter (18).
18
22
17
16
21
20
409-1209
NOTE
Prior to installing capscrews, apply loctite 242.
18.
Install hydraulic piston pump drive adapter (18), four new lockwashers (17) and four capscrews (16).
0290 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals