 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TRANSMISSION FRONT COVER ASSEMBLY MAINTENANCE - CONTINUED
0290 00
DISASSEMBLY - CONTINUED
13.
Remove snap ring (25) and auxiliary pump gear (26).
37
38
39
14.
Use a punch to strike shaft (27) until cover (28) comes
25 26
off and shaft (27) comes out.
6
31
33
32
15.
Remove snap ring (29) from front cover (6).
16.
Remove bearing (30) from shaft (27).
17.
Remove bearing (31) and snap ring (32) from front
cover (6).
29
30
18.
Remove two pipe plugs (33).
27
19.
Remove sleeve (34).
20.
Remove three capscrews (35) and oil passage cover
35
34
(36).
36
21.
Remove four capscrews (37) and identification plate
28
(38).
409-1210
22.
Remove breather (39).
CLEANING
See Cleaning instructions (WP 0316 00).
INSPECTION
See Inspection instructions (WP 0317 00).
ASSEMBLY
1.
Apply loctite 59241 and install breather (39).
2.
Install identification plate (36) and four capscrews (37).
3.
Install oil passage cover (36) and three capscrews (35).
4.
Install sleeve (34). Align index mark on sleeve (34) to center of locating hole.
5.
Apply loctite 59241 and install two pipe plugs (33).
NOTE
When installing cover, apply loctite 242.
6.
Install snap ring (32) and bearing (31) in transmission front cover (6).
7.
Install snap ring (29) inside front cover (6).
8.
Install bearing (30) on shaft (27).
0290 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals