 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TRANSMISSION ASSEMBLY REPAIR - CONTINUED
0289 00
ASSEMBLY - CONTINUED
38.
Press one bearing (39) onto shaft assembly (26) until it is tight against snap ring.
39.
Install appropriate pair of alignment bars between weld gear (38) and piston (45), as required, to hold weld gear (38) off
piston. Use either narrow or wide bars to ensure that weld gear (38) is held off piston 1/4 in. (6.35 mm) and at the same
time engages all clutch plates.
40.
Install weld gear (38) on shaft assembly (26).
41.
Press one bearing (39) onto shaft assembly (26) and into weld gear (38). Remove alignment bars to seat bearing (39) and
weld gear (38).
26
37
39
38
45
3,4,5
409-1154
409-1185
42.
Install snap ring (37) onto shaft assembly (26).
43.
Press bearing (36) onto shaft assembly (26).
44.
To assemble third stage clutch pack (5), install new outer piston seal (66) onto piston (64).
45.
Install new O-ring (65) on piston (64).
36
66
65
26
64
409-1166
409-1186
0289 00-18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals