TURBOCHARGER ASSEMBLY REPAIR (165 HP)

TM 10-3930-660-24-2

TURBOCHARGER ASSEMBLY REPAIR (165 HP)

0282 00

THIS WORK PACKAGE COVERS

Disassembly, Cleaning, Inspection, Assembly

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Performed packing (28)

Tool kit, general mechanic's (Item 39, WP 0324 00)

Retaining ring (31 and 33)

Shop equipment, automotive maintenance (Item 21,

Seal ring (22 and 26)

Materials/Parts

References

WP 0316 00

Oil, lubricating (Item 30, WP 0323 00)

Bearing (32)

Gasket (36)

Equipment Condition

Locknut (4 and 20)

Turbocharger removed (WP 0026 00)

DISASSEMBLY

Place turbocharger in a vise with soft jaws and clamp

by the turbine housing (1) inlet flange.

NOTE

Note position and length of control rod from

boost capsule actuator for aid in installation.

WARNING

Use care when removing snap and retaining

rings. Snap and retaining rings are under spring

tension and can act as projectiles when released

and could cause severe eye injury.

Remove retaining ring (2) from turbine housing (1)

409-1819

TR01384

control lever.

Remove adjusting link (3) from turbine housing (1) control lever.

Remove two locknuts (4), boost capsule actuator (5), and adjusting link (3) from bracket (6). Discard locknuts.

Loosen nut (7). Remove adjusting link (3) and nut from boost capsule actuator (5).