 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TRANSMISSION ASSEMBLY REPLACEMENT - CONTINUED
0237 00
REMOVAL - CONTINUED
25.
Lift transmission forward and to the side so it clears
boom lift cylinders.
26.
Support piston pump (41) and remove two hex head
42,
capscrews (42), two lockwashers (43), two flatwashers
43,
(44) and piston pump. Discard lockwashers.
44
27.
Remove and discard O-ring (45) from hydraulic piston
45
pump drive adapter.
46,47,49
41
28.
Remove two hex head capscrews (46), two lockwash-
ers (47) and tandem gear pump (48). Discard lock-
48
washers.
29.
Remove and discard O-ring (49) from hydraulic gear
pump drive.
409-1152
CLEANING
See Cleaning instructions (WP 0316 00).
INSPECTION
See Inspection instructions (WP 0317 00).
INSTALLATION
NOTE
After transmission replacement, ensure that parts not issued with transmission are removed and installed on
new transmission.
1.
Install tandem gear pump (48) on transmission.
2.
Install new O-ring (49) on hydraulic gear pump drive.
3.
Place tandem gear pump (48) in position on transmission oil pump.
4.
Install two new lockwashers (47) and two hex head capscrews (46).
5.
Install piston pump (41) on transmission.
6.
Install a new O-ring (45) on hydraulic piston pump drive adapter.
7.
Place piston pump (41) in position on transmission.
8.
Install two flatwashers (44), two new lockwashers (43) and two hex head capscrews (42).
9.
Install transmission in vehicle.
0237 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals