|
|
TM 10-3930-660-24-1
PREPARATION FOR RETURN TO SERVICE FROM SHORT-TERM STORAGE
INTRODUCTION
1.
Remove the seals from all engine openings, including the air intake, exhaust outlet and crankcase breather tube.
2.
If removed, install batteries.
3.
Fill the fuel tank with fuel. Check the oil level in the crankcase, axles, transmission, hydraulic reservoir and wheel ends.
4.
Check the radiator coolant level.
5.
Crank the engine with the auxiliary fuel shut-off switch in the OFF position, until the oil pressure gauge registers oil
pressure. Place the auxiliary fuel shut-off switch in the ON position.
6.
Start the engine. Allow the engine to idle for a few minutes and ensure that it is receiving lubrication.
7.
Drive the vehicle without a load and check the engine, transmission, brakes and steering for proper operation. Check all
hydraulic functions and electrical accessories for proper operation.
END OF WORK PACKAGE
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |