 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
PREPARATION FOR RETURN TO SERVICE FROM LONG-TERM STORAGE
INTRODUCTION
1.
Inflate the tires to the recommended pressures and remove blocking from under axles.
2.
Fill the fuel tank with fuel. Check the oil level in the crankcase, axles, transmission, hydraulic reservoir and wheel ends.
3.
Check the radiator coolant level.
4.
Install fully charged batteries.
5.
Lift the fan belt tensioner and position the engine drive belt around the alternator pulley. Ensure that the belt is properly
positioned around all other pulleys.
6.
Remove the seals from all engine openings, including the air intake, exhaust outlet and crankcase breather tube.
7.
Crank the engine with the auxiliary fuel shut-off switch in the OFF position until the oil pressure gauge registers oil
pressure. Place the auxiliary fuel shut-off switch in the ON position.
8.
Bleed the fuel lines and start the engine. Allow the engine to idle for a few minutes and ensure that it is receiving lubri-
cation.
9.
Drive the vehicle without load and check the engine, transmission, brakes and steering for proper operation. Check all
hydraulic functions and electrical accessories for proper operation.
END OF WORK PACKAGE
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals