 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
FORK SIDESHIFT CYLINDERS REPLACEMENT - CONTINUED
0200 00
REMOVAL - CONTINUED
11.
Operate controls to shift left fork (2) to right side of
fork carriage (3). The left fork will not move, but left
fork sideshift cylinder (11) will be fully retracted.
NOTE
Tag hydraulic lines to aid in installation.
12.
Disconnect two hydraulic lines (14) from left fork
sideshift cylinder (11). Plug and/or cap all hydraulic
fittings.
13.
Remove socket head screw (9) and retainer (10) from
right side of fork carriage (3).
14.
Remove left fork sideshift cylinder (11) from fork car-
riage (3).
15.
To remove thrust bushings (15), remove six screws
14
14
(16).
16.
Remove thrust bushing retainer (17).
17.
Push thrust bushing (15) to inside of fork carriage (3)
8
to remove. Discard thrust bushing.
409-785
18.
Repeat steps 15 thru 17 for other thrust bushing (15).
INSTALLATION
NOTE
Remove caps and plugs as hoses are installed. Wipe all sealing surfaces on valve and hoses clean and dry.
1.
If removed, press new thrust bushing (15) into position from inside of fork carriage (3).
2.
Install thrust bushing retainer (17).
NOTE
Apply loctite to threads of screws as installed.
3.
Install six screws (16).
4.
Repeat steps 1 thru 3 for other new thrust bushing (15).
5.
Place left fork sideshift cylinder (11) in fork carriage (3).
6.
Apply loctite to threads of socket head screw (9).
7.
Install socket head screw (9) and retainer (10) in right side of fork carriage (3). Torque socket head screw to 46 lb-ft (62
Nm).
8.
Install two hydraulic lines (14) on left fork sideshift cylinder (11) as tagged.
0200 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals