 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
CARRIAGE TILT CYLINDER REPLACEMENT - CONTINUED
0184 00
INSTALLATION - CONTINUED
NOTE
8
Apply anti-seize compound to pin as
installed.
8.
Stop engine and install cylinder rod pivot pin (2).
2
9.
Install retaining bolt (13) and new locknut (14).
10.
Position MLRS valve cover (7) on attachment.
13,14
409-4075
11.
Apply loctite to nut (6) threads.
4,5
12.
Place new lockwashers (5) over bolts (4).
13.
Secure cover with nuts (6) and bolts (4).
14.
Connect floodlight.
7
15.
Connect wires (3) to MLRS floodlight as tagged.
16.
Purge air by cycling carriage tilt function five times.
17.
Start engine, check for proper operation and leaks
3
6
(TM 10-3930-660-10).
409-698
NOTE
Anytime the hydraulic oil has been drained and changed or maintenance has been done on the hydraulic sys-
tem, it is possible that the hydraulic pumps have air in the pump cavities. This air must be purged from the
cavity before the pump will operate (WP 0167 00).
18.
Purge air from carriage tilt cylinder hydraulic circuit by operating carriage tilt function five times.
19.
Stop engine and relieve hydraulic pressure by operating carriage tilt controls (TM 10-3930-660-10).
END OF WORK PACKAGE
0184 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals