 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
BRAKE SYSTEM HOSES, LINES AND FITTINGS MAINTENANCE - CONTINUED
0133 00
REMOVAL - CONTINUED
NOTE
Note routing of hoses on machine for use during installation.
1.
Disconnect hose (3) from elbow (1) on service brake
1
caliper (4).
1
3
3
4
2.
Loosen and remove elbow (1) from service brake cali-
per (4).
3.
Loosen and remove hoses (3) from tee (2).
4.
Carefully remove hoses (3) from vehicle as required.
2
3
FRONT BRAKE CONNECTIONS SHOWN -
409-521
REAR BRAKE SYSTEM CONNECTIONS ARE IDENTICAL
REPAIR
NOTE
Brake system hydraulic hoses can be repaired by installing new end fittings.
Refer to TM 9-4940-468-13 for instructions on how to repair hydraulic hoses.
INSTALLATION
NOTE
Remove caps and plugs as hoses are installed. Wipe all sealing surfaces on brake components and hoses
clean and dry. Apply film of clean hydraulic oil to all sealing surfaces as hoses are connected.
1.
Install elbow (1) to service brake caliper (4).
2.
Connect hose (3) to elbow (1).
3.
Connect hoses (3) to tee (2).
4.
Bleed service brake system (WP 0129 00).
5.
Remove wheel chocks.
END OF WORK PACKAGE
0133 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals