 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
BRAKE SHOES MAINTENANCE - CONTINUED
0130 00
INSPECTION - CONTINUED
3.
Check shoes (1) for oil or grease. Clean shoes with denatured alcohol or by burnishing. Replace shoes if grease or oil
cannot be removed.
NOTE
Cracks on surface of shoes are normal when brakes are used under high temperature conditions.
4.
Check shoes (1) for cracks. Replace shoes if necessary.
1
1
409-503
409-504
INSTALLATION
CAUTION
Always replace both shoes as a set. If only one shoe is replaced, possible disc damage can occur.
1.
Position shoes (1) in brake housing (4).
2.
Position brackets (3) on brake housing (4).
5
4
3.
Apply loctite to threads of four capscrews (2) and
secure brackets (3) with capscrews. Torque capscrews
1
to 170 lb-ft (230 Nm).
3
4.
Ensure that shoes (1) move freely in housing (4).
5.
Bleed air from brake system (WP 0129 00).
6.
Apply and release brake three times to ensure that
brake system operates correctly (TM 10-3930-660-
10). Check for fluid leaks. Ensure that shoes (1) move
freely in housing.
2
409-505
7.
Install wheel assembly (WP 0134 00).
END OF WORK PACKAGE
0130 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals