 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
BRAKE SHOES MAINTENANCE - CONTINUED
0130 00
REMOVAL - CONTINUED
3.
Use wood block against shoes (1) to push pistons (6)
WOOD BLOCK
completely into brake housing (4).
1
4.
Tighten bleeder valves (5).
5.
Remove shoes (1) from brake housing (4).
6
4
5
409-500
INSPECTION
1.
Inspect shoes (1) for wear. Replace shoes if thickness is less than 1/8 in. (0.8 cm).
2.
Inspect shoes (1) for uneven wear. Replace shoes if thickness varies between linings.
NOTE
If shoes are worn unevenly, check pistons for correct operation. Replace pistons that are locked in the bore.
Check that the disc surface is flat and parallel to the linings (WP 0249 00).
UNEVEN SHOE WEAR
MINIMUM SHOE THICKNESS -
1/8 IN. (3MM) FROM BACKING PLATE
1
409-502
1
409-501
0130 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals