 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
PLANETARY WHEEL ENDS SERVICE
THIS WORK PACKAGE COVERS
Service
INITIAL SETUP
Materials/Parts
Tools and Special Tools
Oil, lubricating (Item 32, WP 0323 00)
Tool kit, general mechanic's (Item 39, WP 0324 00)
Shop equipment, common no. 1 (Item 20, WP 0324
Equipment Condition
Vehicle parked on level ground (TM 10-3930-660-
10)
SERVICE
NOTE
The procedure for servicing each of the four planetary wheel ends is the same.
1.
Start engine and move vehicle forward or backward, as required, until embossed oil level line (A) on planetary cover (1)
is horizontal.
2.
Set parking brake and stop engine.
3.
Remove oil level check plug (2) from planetary cover
(1).
4.
Check that oil level is up to bottom check plug hole.
5.
If necessary, add new oil through oil level check plug
hole until oil level reaches bottom of check plug hole.
Do not overfill.
6.
Install oil level check plug (2) to planetary cover (1).
7.
If necessary, drain and refill planetary wheel end (1)
with oil.
8.
Start engine and move vehicle forward or backward,
1
as required, until embossed oil level line (A) on plane-
tary cover (1) is vertical.
A
9.
Set parking brake and stop engine. Place container
under the oil check plug (2).
2
409-486
10.
Remove oil level check plug (2) from planetary cover
(1) and allow oil to drain completely.
11.
Add oil to planetary wheel end (1) as described in step 1.
END OF WORK PACKAGE
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals