 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
AXLE ASSEMBLIES SERVICE - CONTINUED
0125 00
SERVICE - CONTINUED
NOTE
The axles are vented to release pressure caused by axle oil expansion.
A venting hole is located at the top of each axle. On the rear axle, the venting hole is on the left-hand side.
On the front axle, the venting hole is on the right-hand side.
Each venting hole is connected by a hose to a frame-mounted breather.
Cleaning procedures for both front and rear axle venting hoses are similar.
11.
Remove nut (4) and lockwasher (5) securing hose support (6) to vehicle frame stud. Discard lockwasher.
10
12.
Remove elbow (7), hose support (6), hose (9) and
9
breather (10) from vehicle frame stud and axle (1) as
4
an assembly.
13.
Remove elbow (7), breather (10) and hose support (6)
5
from hose (9).
6
7
14.
Inspect hose (9) for obstructions. If present, clear
obstructions from hose.
15.
Install elbow (7), breather (10) and hose support (6) to
hose (9).
16.
Position elbow (7), hose (9), hose support (6) and
breather (10) as an assembly on axle (1) and vehicle
frame stud.
1
17.
Secure hose support (6) to vehicle frame stud with nut
(4) and new lockwasher (5).
409-4066
FRONT AXLE SHOWN - REAR AXLE SIMILAR
END OF WORK PACKAGE
0125 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals