REAR TURN SIGNAL LIGHTS REPLACEMENT

TM 10-3930-660-24-1

REAR TURN SIGNAL LIGHTS REPLACEMENT

0098 00

THIS WORK PACKAGE COVERS

Removal, Installation, Bulb Replacement

INITIAL SETUP

Tools and Special Tools

Materials/Parts - Continued

Bulb (16)

Tool kit, general mechanic's (Item 39, WP 0324 00)

Lockwasher (11)

Materials/Parts

Starwasher (7)

Equipment Condition

Sealant, Loctite (Item 43, WP 0323 00)

Vehicle parked on level ground (TM 10-3930-660-

Strap, tie down (Item 56, WP 0323 00)

10)

Battery cables disconnected (WP 0107 00)

Tag, marker (Item 57, WP 0323 00)

NOTE

Tag all electrical connections before removing for use during installation.

REMOVAL

Remove and discard tie down strap (1).

Disconnect male plug (2) from female plug (3) con-

necting electrical lead (4) from vehicle wiring harness

to rear turn signal light assembly (5).

NOTE

One wire lead disconnected in step 3 below is

part of the rear turn signal light assembly. The

other wire lead is part of the vehicle wiring har-

2,3,4

ness.

Remove capscrew (6) and starwasher (7). Disconnect

two wire leads (8 and 9). Remove second starwasher

(7). Discard starwashers.

8,9

409-362