 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
HOURMETER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
References
Tool kit, general mechanic's (Item 39, WP 0324 00)
Equipment Condition
Materials/Parts
Vehicle parked on level ground (TM 10-3930-660-
Sealant, Loctite (Item 44, WP 0323 00)
10)
Battery cables disconnected (WP 0107 00)
Tag, marker (Item 57, WP 0323 00)
REMOVAL
NOTE
Tag all electrical connections before removing for use during installation.
For replacement of other panel-mounted gauges, refer to WP 0068 00.
1.
To raise right-hand instrument panel (1), remove four
3 6
capscrews (2) from right-hand instrument panel and
1
carefully raise instrument panel to provide access to
rear of hourmeter (3).
2.
Remove two electrical leads (4) from hourmeter (3).
8
2
3.
Disconnect two female connectors (5) of electrical
7
leads (4) from two male terminals (6) of hourmeter
5
(3).
4
4.
Remove hourmeter (3) from instrument panel (1).
5.
Remove two nuts (7) and one clamp (8) securing hour-
meter (3) to instrument panel (1).
6.
Slide hourmeter (3) out of mounting hole on instru-
ment panel (1).
INSTALLATION
1.
Install hourmeter (3) to instrument panel (1).
409277
2.
Slide hourmeter (3) in through mounting hole on
instrument panel (1).
3.
Secure hourmeter (3) to instrument panel (1) with clamp (8) and two nuts (7).
4.
Connect two electrical leads (4) to hourmeter (3) as tagged.
5.
Push two female connectors (5) of electrical leads (4) onto two male terminals (6) of hourmeter (3).
6.
Lower and secure right-hand instrument panel (1).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals