DRIVE BELT AND TENSIONER REPLACEMENT - TM-10-3930-660-24-10373

TM 10-3930-660-24-1

DRIVE BELT AND TENSIONER REPLACEMENT

0061 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Equipment Condition

Tools and Special Tools

Vehicle parked on level ground (TM 10-3930-660-

Tool kit, general mechanic's (Item 39, WP 0324 00)

10)

Shop equipment, common no. 2 (Item 19, WP 0324

Engine off and cool (TM 10-3930-660-10)

Fan guards removed (WP 0060 00)

REMOVAL

NOTE

Drive belt deflection when measured mid-

2 4

way between longest span of belt should

be no greater than 1/2 in. (12.7 mm). If

deflection is greater than 1/2 in. (12.7

mm), replace belt. Drive belt tension is not

adjustable.

To remove drive belt (1), lift tensioner (2).

Remove belt (1) from alternator pulley (3), fan pulley

(4), crankshaft pulley (5) and water pump pulley (6).

Remove belt (1) from around blades of fan (7) and

remove from vehicle.

If necessary, remove tensioner (2).

409-247